Paxton’s CanDryer replaces conventional air knives and nozzles with an all-in-one manifold designed to improve drying quality while also enhancing usability and production floor safety. The CanDryer is an all-in-one air manifold that provides complete drying of 8 oz and 24 oz cans to improve the quality of coding, labeling, and packaging operations. Not only is Paxton’s CanDryer available for both high and low line speeds, but it is also the ideal solution for multi-purpose lines where bottle or can sizes vary frequently.
Benefits:
- Thoroughly dries the tops and sides of 8 oz - 24 oz cans
- Improves quality of coding, labeling, and vision system results
- Optimizes drying by eliminating variability due to air knife positioning
- Improves production floor safety by restricting water spray with built-in spray containment
- Easily adjustable for varying can heights
- Smaller footprint than conventional Air Knife Drying Systems
CanDryer System Features:
- All-in-One Air Manifold: incorporates two air knives and six nozzles into a single manifold
- PX-Series ultra-high efficiency centrifugal blower
- Manifold mounting arm with crank
- Polypropylene Blower Enclosure
- Available in two Air Knife lengths
- Installation Components: fittings and adaptors
- Empty bottle/can blow-off adaptor
Mounting Arm Features:
- Integral crank for easy and effortless product change over
- Horizontal (5’’) and vertical (10’’) adjustment
- Locks in place after adjustment
- 304 Stainless Steel construction
- At minimum height: 9’’ x 24’’ x 14’’
Empty Container Blow-Off Attachment:
- Stainless Steel Flare Nozzle and Mounting Bracket with 5 feet of hose
- 1.25’’ diameter nozzle with 1.8’’ flare
- Horizontal 1’’ and vertical 9’’ adjustment for nozzle mounting bracket
- Increased thrust for heavier containers
Paxton’s CanDryer replaces conventional air knives and nozzles with an all-in-one manifold designed to improve drying quality while also enhancing usability and production floor safety. The CanDryer is an all-in-one air manifold that provides complete drying of 8 oz and 24 oz cans to improve the quality of coding, labeling, and packaging operations. Not only is Paxton’s CanDryer available for both high and low line speeds, but it is also the ideal solution for multi-purpose lines where bottle or can sizes vary frequently.
Benefits:
- Thoroughly dries the tops and sides of 8 oz - 24 oz cans
- Improves quality of coding, labeling, and vision system results
- Optimizes drying by eliminating variability due to air knife positioning
- Improves production floor safety by restricting water spray with built-in spray containment
- Easily adjustable for varying can heights
- Smaller footprint than conventional Air Knife Drying Systems
CanDryer System Features:
- All-in-One Air Manifold: incorporates two air knives and six nozzles into a single manifold
- PX-Series ultra-high efficiency centrifugal blower
- Manifold mounting arm with crank
- Polypropylene Blower Enclosure
- Available in two Air Knife lengths
- Installation Components: fittings and adaptors
- Empty bottle/can blow-off adaptor
Mounting Arm Features:
- Integral crank for easy and effortless product change over
- Horizontal (127 mm) and vertical (635 mm) adjustment
- Locks in place after adjustment
- 304 Stainless Steel construction
- At minimum height: 229 x 737 x 356 mm
Empty Container Blow-Off Attachment:
- Stainless Steel Flare Nozzle and Mounting Bracket with 5 feet of hose
- 32 mm diameter nozzle with 46 mm flare
- Horizontal 25 mm and vertical 229 mm adjustment for nozzle mounting bracket
- Increased thrust for heavier containers